FVDI ABRITES Commander

Currently FVDI is Distributed with the following Diagnostic Software:

1. FVDI ABRITES Commander for Volkswagen, Audi, Skoda, Seat
FVDI Commander for VAG Features:
1. Reading Pin code by OBDII
2. Programming keys by OBDII. Preparation of dealer’s keys.
3. Mileage recalibration by OBDII
4. Clearing crash data DTCs by OBDII
5. Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
6. Exchange speed limit of MMI-TV system
7. Coding calculator – supported short/long coding
8. Synchronization/Adaptation KESSY and ELV

2. FVDI ABRITES Commander for Mercedes-Benz, SMART, Maybach
FVDI Mercedes Commander Standard Functions:
1. Read identification
2. Read extended identification
3. Read/Clear fault codes
4. Scanning for control units / Clearing fault codes in all control units
5. Display of Actual Values
6. Actuator Tests
7. Reset of control units
8. Control unit adaptations
9. Adjustment of injector injection quantities adaptation for Diesel Engines (CDI-4, CDI-5)
FVDI Mercedes Commander Special Function:
1. By OBDII – Comprehensive Mileage Recalibration for W221 and W216 vehicles. The mileage is changed in the following units: CGW, EZS, Instrument Cluster and all other units, which store the mileage (like Tire Pressure Monitor and Adaptive Brake, for example) , Read/Write service history records in ZGW of W221 S-Class and W216 CL, Read/Write complete EEPROM and Flash of CGW (Central gateway) of W221 S-Class and W216 CL, Mileage Recalibration in dashboard for Vito, Viano, Sprinter after 2006 year E-Class W211, CLS W219, GL X164, ML W164, R-Class W251, CLK W209, C-Class W203 and G-Class W463 A-Class W169, B-Class W245
2. By OBDII – Mileage Recalibration for W204/W212/X204/W197/W207 vehicles. The mileage is changed in the following units: ASSYST, ASSYST Plus, EZS, Instrument Cluster
3. By OBDII – Read/Write EEPROM of Dashboard control units, ESP, Sensotronic Brake Control (SBC) and many others…Online manual for Sensotronic Brake Control Repair
4. By OBDII – Airbag – Read/Write EEPROM, Clear Crash Data, Erase Motohours
5. Dump Tool – calculate mileage values, reset mileage values, clear airbag crash data, make engine control virgin and so on
6. By OBDII – ECU – Read/Write Flash, Read/Write EEPROM of Engine Control Units
7. DAS-2 – Generation of key dumps for vehicles with DAS-2 Immobilizer system.
8. DAS-2a – Programming transponder keys for DAS 2a Immobilizer system (W168 A-Class).
9. By OBDII – DAS-2b – Key Learning for Mercedes W163; Read/Write EEPROM of AAM/EAM control modules; Learn radio code of transmitter keys; Deactivate/Reactivate keys
10. Transponder generation
11. By OBDII – TV/AUX activation/deactivation
12. By OBDII – Seatbelt warning activation/deactivation
13. By OBDII – Reverse warning activation/deactivation
14. By OBDII – Activation/deactivation of Speed warning for Gulf States
15. Electrical Steering Lock (ESL) – Read/Write/Unlock EEPROM of ESL for the following vehicles: W202, W208, W209, W210, W203, W211, W219 by direct connection to the ESL module.
16. Electrical Ignition Switch (EIS, K-Line) – Read EEPROM of EIS and ESL modules by diagnostic connection to the EIS module; Open/Close ESL
17. Electrical Steering Lock (ESL, CAN) – Disable/Enable keys; Write VIN of new units; Activate/Deactivate ESL; Activate/Deactivate EZS
18. By OBDII – Change ASSYST PLUS Service maintenance records
19. By OBDII – Change ASSYST Service maintenance records
20. By OBDII – Read/Write COMPLETELY EEPROM of Central Gateway (CGW) via OBDII. Works for the following vehicles : W211, W171, W219, W164, X164, W169, W245, W204, W212, X204, W218
21. By OBDII – SMART key teach-in (K-Line and CAN)
22. By OBDII – Renew of 7-Gear Electronic Transmission Control Unit (722.9) and ISM – Intelligent Selector Module

3. FVDI ABRITES Commander for BMW, MINI
ABRITES Commander for BMW is a PC – Windows based diagnostic software for dealer level access to the vehicle (identification, trouble codes and so…), mileage recalibration, key programming, programming vehicle order. Tool can access CAS1, CAS2, CAS3 and CAS3+ by OBDII independent from the firmware of the CAS. Also you can perform unusual for remaining diagnostic tools operations with the electronic modules inside of the vehicle like programming Vehicle Order and Coding of electronic control units. Access to the EEPROM memory of the units in the vehicle.

BMW FVDI Covers Vehicles
BMW series starting from E36 up to latest models F series (F01, F10, F20, F25 and so…)
BMW FVDI Functions Included in The Base Package (FVDI Interface)
1. Identification (VIN, mileage, production data)
2. Read and clear Diagnostic trouble codes (current, history and shadow)
3. Added DTCs in 17 DTC conditions information (Odometer value, Timestamp, full engine status report for EDC17)
4. Some DTCs (mostly that of F series) are given detailed documentation of what caused the problem and how the problem should be handled
5. Manager of service intervals, reset service reminders (CBS)
6. Measured values/live data
7. Read and Program Engine Control Unit flash memory for tuning purposes by OBDII
8. Entering and leaving from logistic mode of the modules in the vehicle
9. Synchronization DME/DDE and EWS/CAS, CAS and ELV
10. Enable / Disable of keys
11. Enable / Disable of TV function for E3x,E46,E5x,E83,E85,E86 (for the next bodies available via unit coding)
12. Ability for diagnostic on internal CAN buses
13. Read / Program mileage from the IKE, LCM, EWS, ECU, ABS, VTG, EGS (please refer coverage list)
14. Displaying KEY CUTTING code (mechanical code) stored in CAS modules
BMW FVDI Special Functions:
1. Service intervals/CBS – ability for programming of service counters by OBDII
2. Programming flash memory of all electronic control units by OBDII (can be used directly databases released from BMW)
3. Programming Vehicle Order data (you can add new units to configuration of the vehicle) – E body
4. Coding (configuration) of each electronic control unit in the vehicle – E body
5. Programming identification of the modules in the vehicle
6. Programming User Information Fields in the electronic modules
7. Read / Write of memory of the electronic control modules
8. Program mileage stored in CAS1, CAS2 and CAS3 by OBDII
9. Program keys by OBDII – CAS1, CAS2 and CAS3 systems – support latest versions CAS3 updated in 2011 year
10. Key programming for CAS3+ with latest firmware version (ISTA-P 45)
11. Preparing a keys by dump for BMW models with CAS4 – newest BMW 1, 5, 5 GT, 6, 7, X3 series ( body Fxx)
12. Read / Write eeprom from CAS1 via OBDII
13. Read / Write eeprom data from CAS2/CAS3 via dash connector or cas-connector
14. Read / Program mileage stored in different electronic control units by OBDII like ECU, EGS, SGM, JBBF and many others
15. Extracting and programming synchronization code between ECU and CAS by OBDII
16. Ability to works together with transponder programmer

4. FVDI ABRITES Commander for OPEL, VAUXHALL
Standard Diagnostic Functions:
1. For all electronic control units reading identification data
2. For all electronic control units read error (DTCs)
3. For all electronic control units clear error (DTCs)
4. Device scan
5. Data Display / Measured values
6. Security code programming
7. Vehicle identification programming
8. Injector programming – Diesel engines
9. Programming of the CAN configuration
10. Program immobilizer function
– Adaptation of Engine Control Module to immobilizer
– Adaptation of Immobilizer to the vehicle
11. Program immobilizer outputs
– Enable/Disable Anti Theft Warning system
Special Functions:
1. Key Programming
– supported all models for programming of keys and remote controls by OBDII – ASTRA J, INSIGNIA, Chevrolet CRUZE and all older ..
– Read mechanical key number
2. Read Security Code
– With a new special function ON008 you can read Security code from all Opel/Vauxhall vehicles with CAN BUS by OBDII – Astra H, Corsa D, Vectra C, Zafira B, Agila B
– Read security code PSG16 (Y20DTH, Y22DTR) – Astra G, Zafira, Vectra C
– Read security code Simtec 70(X18XE1,X20XEV); Simtec 71(Z18XE,Z22XE); Simtec 71.1(Z18XE,Z22XE); Simtec 71.5(Z18XE); Simtec 71.6(Z18XE); Simtec 75(Z16XER, Z18XER); Simtec 75.5(Z16XER, Z18XER); Delco HSFI 2.4 (Z16XEP); Denso (A17DTR); GM Brazil – Delphi Delco (C14NE)
3. Read/Write EEPROM
– Magneti Marelli 1.3 16V CDTI (Z13DT) – Agila, Corsa C, Tigra B
– SIMTEC71.1(Z18XE,Z18XEL) – Astra G, Corsa C, meriva, Tigra B, Vectra B, Zafira
– Read eeprom of the instrument Panel Cluster of Astra G, Corsa C, Meriva, Tigra B
4. Odometer Correction
– Odometer correction – Insignia, Astra J, Chevrolete Cruze by OBDII
– Odometer correction – Movano B – Instrument Panel by OBDII
– Odometer correction in EDC16 – 1.7;1.9 by OBDII
– Odometer correction ANTARA – EDC16 by OBDII
– Odometer correction in ECU – Bosch ME7.6.2, Delco MT35E
– Odometer correction PSG16 (Y20DTH, Y22DTR) – Astra G, Zafira, Vectra C
– Instrument Panel Cluster – Astra G; Corsa-C; Meriva; Tigra-B; Vectra-B. NOT SUPPORT TRW IPC!
5. Engine Flasher
– Read/Write flash memory from ECU – Simtec 70, Simtec 71, Delco HDRC, Marelli MJD 602, Motronic
7. Delco MT35E
6. Radio
– Read radio code by OBD from Delco CDR500
7. Airbag
– Erase crash data by OBD – Airbag SAB6 – Siemens with MCU Motorola HC11
8. Dump Tool
– Airbag TEMIC Astra G, Corsa C (68HC908AZ32) – clear crash data
– SIEMENS (68HC11E9) GM 24416701 DJ – clear crash data
– Read immobilizer II (TMS) security code from dump
– Bosch EDC16 odometer correction
-Magneti Marelli odometer correction
– Astra G, Astra H, Corsa D instrument panel odometer correction

5. FVDI ABRITES Commander for Peugeot, Citroen
FVDI PSA ABRITES Commander Functions:
Identification (VIN, Part Number, production data, producer, manufacturing date…)
Read and clear diagnostic trouble codes
Clear DTC explanation
Live data display (actual data)
Electronic control unit configuration
Read and Program Engine Control Unit flash memory for tuning purposes by OBDII
Dump Tool – many functions like clear crash data, …
FVDI PSA ABRITES Commander Special Functions:
PIN code reading by OBDII ( CAN bus)
Mileage recalibration by OBDII in BSI module (CAN bus), Instrument cluster ( CAN ), C5, C2
Key programming
Read/Write eeprom from EDC15
Read/Write flash from EDC16
Read/Change Service list
Immobilizer Enable/Disable (EDC15)
Siemens SID80x series (SID801/SID802/SID801A/SID803/SID803A/SID804/SID806) – Flash/Eeprom read/write, Edit servicelist, Readange PIN code

FVDI PSA ABRITES Commander For Peugeot and Citroen is a dealer level tool for Peugeot and Citroen. FVDI PSA supports diagnose, mileage correction, pin code reading, key programming and special functions.

6. FVDI ABRITES Commander for Fiat, Alfa, Lancia
ABRITES Commander for Fiat/Lancia/Alfa is designed for Odometer Correction and Key Programming of Fiat vehicles.

Standard Diagnostic Functions:
In this version of the software several units have been added. You can connect to them to Read and Clear DTC’s.
Special Functions:
Odometer correction by OBDII in instrument cluster of CAN based vehicles:
Strada
Alfa Giulietta
Fiat 500
Alfa 147
ALfa 159
Lancia Y
Lancia Ypsilon 2012
Alfa MiTo
Ford Ka
Idea
Punto
Punto Evo
Grande Punto
Panda
Palio
Linea
Ducato 2006 – 2011
Ducato 2011+
Fiorino
Albea
Croma 2006+
Doblo
Doblo 2009+
Lancia Musa 2006+
Lancia Delta 2008+
Bravo 2005+
Stilo 2001+
Siena
Maserati Quattro porte 2005, 2006
?
Read/Write Eeprom Memory, Odometer Correction by OBDII of Engine Control Unit – EDC15C5(EURO2), EDC15C7(EURO3).
This Model ECU Has the Following Vehicles:
Alfa 145 – 1.9 JTD
Alfa 146 – 1.9 JTD
Alfa 147 – 1.9 JTD 16V ; 1.9 JTD 8V
Alfa 156 – 1.9 JTD ; 2.4 JTD
Alfa 166 – 2.4 JTD
Fiat Bravo – 1.9 JTD
Fiat Brava – 1.9 JTD
Fiat Doblo – 1.9 JTD
Fiat Ducato – 2.0 JTD ; 2.3 JTD ; 3.8 JTD
Fiat Marea – 1.9 JTD ; 2.4 JTD
Fiat Marengo – 1.9 JTD
Fiat Multipla – 1.9 JTD
Fiat Punto – 1.9 JTD
Fiat Palio – 1.9 JTD
Fiat Stilo – 1.9 JTD
Fiat Siena – 1.9 JTD
Fiat Scudo – 2.0 JTD
Lancia K – 1.9 JTD
Lancia Lybra – 1.9 JTD ; 2.4 JTD
Lancia Thesis – 2.4 JTD
Lancia Z – 1.9 JTD
Read/Write eeprom memory, Odometer correction, Make VIRGIN by OBDII of Engine Control Unit – Marelli Multijet MJD 6JF.
This Model ECU Has the Following Vehicles:
Fiat new Panda – 1.3 IAW Multijet MJD 6JF
Fiat Idea – 1.3 IAW Multijet MJD 6JF
Fiat Doblo – 1.3 IAW Multijet MJD 6JF
Fiat Punto – 1.3 IAW Multijet MJD 6JF
Fiat Grande Punto – 1.3 IAW Multijet MJD 6JF
Fiat Cinquecento – 1.3 IAW Multijet MJD 6JF
Lancia Musa – 1.3 IAW Multijet MJD 6JF
Lancia Ypsilon – 1.3 IAW Multijet MJD 6JF
Read/Write Eeprom memory, Make VIRGIN by OBDII of Engine Control Unit – Marelli IAW 4AF/4EF/59F/5AF/5AM/5NF
Read/Write Flash memory by OBDII of Engine Control Unit – Marelli IAW 4AF/4EF/59F/5AF/5NF/6JF; BOSCH ME7.3H4/ME7.3.1/ME7.2.1 ( BOOT MODE ) , MJD 6JF – IMMO OFF
Change odometer of Engine Control Unit – BOSCH EDC16 – Tested Version for now: Fiat Croma, Alfa 159, Fiat 16, New Fiat Bravo 1.6 JTD, New Lancia Delta 1.6 JTD, Alfa GTV 1.9 JTD
Transponder maker – Preparing transponder by dump of immobilizer to be ready for key programming.
Key learning – by OBDII key programming for various models Fiat, Alfa, Lancia – Alfa 147, Mito; Fiat 500, Bravo, Grande punto, Croma, Doblo, Ducato, Fiorino, Idea, Palio, Panda, Stilo; Lancia Thesis, Delta

7. FVDI ABRITES Commander for Renault
ABRITES Commander for Renault is professional software mainly for programming the new key/card of Renault Vehicles. NO need for Pin Code.
Functions:
* Connecting with all electronic control modules in the vehicle. Working by K and CAN bus diagnostic connection.
* For all electronic control units reading identification data
* For all electronic control units read and clear error (DTCs)
* For all electronic control units live data (measured values)
* For all electronic control units coding/configuration
* For all electronic control units actuator tests
* Airbag crash data clear Dacia Logan/Duster by OBDII
* Program ID in UCH module
* Mileage recalibration in Instrument cluster (JC) – Laguna III, Megane III, Fluence, Master III, Scenic III, Scenic/Modus (2003-2004), Clio II, Kango by OBDII
* Mileage Recalibration by OBDII – Renault Megane II, Renault Clio III 2005 year (Visteon instrument cluster), Renault Megane II 2004 – 2005 year (JC instrument cluster)
* Mileage recalibration for Renault Clio/Kango/Meganne with HC908 JAEGER by dash connector

Key Programming Function / Pin Code Reading:
– Meganne II X84 2003-2006
– Renault Megane II Ph2 X84 2007+
– Renault Megane III X95 2009+
– Renault Megane III X95 2011+?
– Renault Scenic II X64 2003+
– Renault Scenic II Ph2 X64 2007+
– Renault Scenic III X95 2009+
– Renault Scenic III X95 2011+
– Renault Laguna II X56 2000-2005
– Renault Laguna II Ph2 X74 2005-2007
– Renault Laguna III X91 2007+
– Renault Valsatis X73 2002+
– Renault Valsatis Ph2 X73 2006+
– Renault Espace IV X81 2003-2006
– Renault Espace IV Ph2 X81 2006+
– Renault Master Ph2 X70 2002-2006
– Renault Master Ph3 X70 2007+
– Renault Traffic II X83 2002-2006
– Renault Traffic II Ph2 X83 2007+
– Renault Kango MUX Ph2 X76 2002-2007
– Renault Kango X61 2008+
– Renault Clio II Ph2/3 X65 2002-2006
– Renault Clio Symbol
– Renault Clio Symbol 2010+ (BCM JC)*
– Renault Clio Thalia
– Renault Clio Campus
– Renault Clio Sedan
– Renault Clio Classic
– Renault Clio III 2005+
– Renault Clio III with key card
– Renault Modus 2004+
– Renault Grand Modus 2008+
– Renault Master III X62 2010+
– Dacia Duster 2010+ (BCM JC)
– Dacia Logan X90 2004-2008
– Dacia Logan Ph2 X90 2008+
– Dacia Logan 2010+ (BCM JC)
– Dacia Sandero B90 2008+
– Dacia Sandero 2010+ (BCM JC)
– Dacia Solenza 2003-2005
– Renault-Samsung SM3 2006+
– Renault-Samsung QM5
– Renault-Samsung SM3
– Renault-Samsung SM5
– Renault Fluence 2009+
– Renault Fluence (BCM immobilizer) 2009+
– Renault Fluence (BCM immobilizer) 2011+
– Renault Twingo Ph2 X06 2002-2007
– Renault Twingo II X44 2007+
– Opel Vivaro 2002-2006
– Opel Vivaro Ph2 2007+
– Opel Movano Ph2 2002-2006
– Opel Movano Ph3 2007+
– Opel Movano B 2010+
– Nissan Primestar Ph2 2002-2006
– Nissan Primestar Ph3 2007+
– Nissan Platina 2002-2008
– Renault Latitude
– Renault Koleos
8. FVDI ABRITES Commander for Porsche

Porsche FVDI Standard Diagnostic Functions:
For all electronic control units reading identification data
For all electronic control units read error (DTCs)
For all electronic control units clear error (DTCs)
For 911 997, Boxster 987, Cayman, Cayenne electronic control units – live data
For 911 997, Boxster 987, Cayman, Cayenne electronic units read/write coding
Broadcast – for the chosen model – scan all units and clear all DTCs
Porsche FVDI Special Functions:
Engine Control Unit
-ME7.x, ME7.5, ME7.8- Read/Write EEprom, Flash, Read Component Security bytes, Read Sec.access code, ECU Data
-ME5.2, ME7.2 – Read EEprom
-ME 7.8 – Porsche 9×7, 9×6 -Read EEprom
Instrument Cluster K-Line
-Porsche Cayenne – Read/Write EEprom, Read/Change odometer
-Porsche 911, Boxter, GT2, GT3 (9×6) with 93c56 – 1998 – 07/2001 year – Read/Write eeprom, Read/Change odometer
-Porsche 911, Boxter, GT2, GT3 (9×6) with 93c86 – 08/2001 – 2005 year – Read/Write eeprom, Read/Change odometer
Instrument Cluster CAN
-Porsche Cayenne – Read/Write EEprom, Read/Change odometer
-Porsche 9×7 – Mileage recalibration, Read/Write EEPROM, Reset service interval, Total distance, Oil level measurement
Dump Tool
-IMMO – Kessy – Porsche Cayenne [93c86] – shows Sec.access code, Keys data, VIN, Immo number
-ECU ME7.x Reset Component protection data
-ECU ME7.x Security code / Checksum calculator
-Change Odometer ECU ME9 [95320] – Porsche 997
-Change Odometer 95P08 – Porsche 996
-Change Odometer 95P08 – Porsche 997
Porsche FVDI Advanced Functions:
Calculate teaching code from Alarm system – Porsche (9×6)
Key Learning
-Learn transponder/key – GT2 996, GT3 996, 911 996, Boxster 996, Carrera GT
-Learn remote control – GT2 996, GT3 996, 911 996, Boxster 996, Carrera GT
-Learn transponder/key – Cayenne
-Learn transponder/key – 911 997, Bosxter 997, Cayman

9. FVDI ABRITES Commander for Nissan, Infiniti
Supported Immobilizer Systems:
Immobilizer NATS-2 Siemens – 5WK4593, 5WK4640, 5WK46472, 5WK4825, 5WK48642.
NISSAN MICRA (K11) 1997 year
NISSAN Primera W/P10 1991-1996 year
NISSAN Maxima QX (A32) Schalter V 6 2,0ltr – 1995-2000 year
Immobilizer NATS-4 Siemens – 5WK4738, 5WK4750, 5WK4803, 5WK48543A, 5WK48543B, 5WK48692.
Extracting Immo Software Version, Read/Write eeprom from immo, Read Key Code, ADD Key, Delete Specific Key, Delete All Keys.
NISSAN Micra 1998-2000 year
NISSAN Primera 2000-2003 year
NISSAN Almera 1998-2000 year
Immobilizer NATS-5,NATS 5+ Siemens – 5WK48041, 5WK48042, 5WK48042, 5WK48643, 5WK48643, 5WK48644, 5WK48644, 5WK48644.
Extracting Immo Software Version, Read/Write eeprom from immo, Read PIN Code, Check Key Status, ADD Key, Delete All Keys.
NISSAN Altima 2001-2004 year
NISSAN Altima 2005 year
NISSAN Armada 2004-2005 year
INFINITI FX35/FX45 2004-2005 year
INFINITI G20 2000-2002 year
INFINITI G35 2003-2005 year
INFINITI I30, I35 2000-2004 year
INFINITI M45 2003-2005 year
NISSAN Maxima 2000-2005 year
NISSAN Murano 2003-2005 year
NISSAN Pathfinder 2001-2005 year
NISSAN Quest 2004-2005 year
INFINITI QX4 2001-2004 year
INFINITI Q45 2002-2004 year
NISSAN Sentra 2000-2004 year
NISSAN Titan 2004-2005 year
NISSAN 350Z 2003-2005 year
NISSAN Primera 2003 year
Nissan Micra 2007+
Nissan Note 2006+
Nissan Tiida 2007+
Nissan Platina 2006+
Nissan Kubistar 2007+
Nissan Sunny 2006+
Nissan Almera Classic 2006+
Nissan Primestar/Interstar 2002-2006
Nissan Primestar/Interstar 2007+
PIN Code CALCULATOR FOR ALL NEW BCM MODULES FOR INFINITY AND NISSAN CARS 2007-2012 FOR NORTH AMERICA, SOUTHAMERICA, ASIA, AUSTRALIA,MIDDLE EAST , BCM MODULES 5 DIGITS TO PIN 4 DIGITS? (EXAMPLE 12B3A=NEW CODE 4854/OLD CODE 3934)
WORKS FOR THESE CARS – ALTIMA SEDAN, ALTIMA COUPE, VERSA HATCHBACK, VERSA SEDAN,CUBE, SENTRA, NISSAN LEAFT, MAXIMA, Z, Z ROADSTER, GTR, JUKE, ROUGE, MURANO, MURANO CROSS CABRIOLET XTERRA, PATHFINDER, ARMADA, QUEST, FRONTIER, TITAN, 370Z, XTRAIL, TIIDA, FRONTIER, MARCH,CIMA,FUGA,SKYLINE, LATIO,NEW TEANA, NEW SUNNY, PATROL, QASHQAI, DUALIS, FRONTIER, NAVARA, LIVINA, GRAND LIVINA, BLUEBIRD,G SEDAN, G COUPE, G CONVERTIBLE, INFINITY M, INFINITY EX, INFINITY EX, INFINITY FX, INFINITY JX, INFINITY QX

10. FVDI ABRITES Commander for Toyota / Lexus

Standard Diagnostic Functions:
* Read fault codes
* Clear fault codes
* Device scan
* Display of Actual Values
* Actuator Tests
* Custom Read/Write
Special Functions:
Key Programming
– provides ability for reset of immobilizer or smart system of the vehicle, registration of keys and remotes
Transponder Tool
– programming key by dump of smart system/immobilizer, identification of transponders, cloning of ID67,ID68,ID70 and Texas fixed transponders, ability for preparation of ID67, ID68,ID70
Dump Tool
– wide range of options for resetting (renew) of different units (immobilizers, smart systems, engine control modules, instrument clusters) by memory dump. Supported are also latest immobilizers with encrypted memory
ID-box Reset by LIN Connection
ECU Flasher – available for EDC15, EDC16 engine control modules

11. FVDI ABRITES Commander for Tag without FVDI  host
With tag key tool you can program keys/transponders for vehicles, bikes or trucks from different brands that using Megamos 13,Megamos 48 (Megacrypt I), Megamos 8E (Megacrypt II), Temic 11, Temic 12, T5, TK5555, Philips PIT – 7930/7931/7935 (PIT), Philips HITAG2 -7936, 7941, 7942, 7943, 7944, 7945, 7946, 7947, 7952, 7953, 7961.

12. FVDI ABRITES Commander for Tag with FVDI host
With this software you can program keys/transponders for vehicles, bikes or trucks from different brands that  Megamos 48 (Megacrypt I), Megamos 8E (Megacrypt II), Philips HITAG2 7936, 7935, 4C (NEW).
Software is compatiable with AN020 and ZN001 transponder programmers. Just need dump from your immobilizer, put your NEW KEY (or transponder) on the programmer and generate working key! You can also produce preprogrammed transponders for a different vehicles.
This programmer works with AVDI interface. It also is compatible with our software ABRITES Commander for VAG, BMW, Renault, Nissan, Mercedes, Fiat.

13. FVDI ABRITES Commander for Volvo

Standard Diagnostic Functions:
1. For all electronic control units reading identification data
2. For all electronic control units read error (DTCs)
3. For all electronic control units clear error (DTCs)
4. Device scan
5. Data Display / Measured values
Special Functions:
Mileage recalibration by OBDII in instrument cluster and CEM module – S40, V40, V50, S60, S80, V70, S80, XC60, XC70, XC90
Read/program internal EEPROM of the instrument cluster by OBDII – S40, V40, V50, S60, S80, V70, S80, XC60, XC70, XC90

14. FVDI ABRITES Commander for FORD, MAZDA
FVDI ABRITES Commander for FORD is a software for diagnostic of FORD vehicles over CAN bus. It provide abilities for Incode calculations, key programming and mileage recalibration.

15. FVDI ABRITES Commander for Chrysler, Dodge and Jeep
Description:
ABRITES Commander for Chrysler, Dodge and Jeep is a software intended for learning of keys and Mileage Recalibration of these vehicles.
Basic diagnostics of all control units, including, but not limited to Engine, Instrument Panel Cluster, Skim, Electronic Transmission Control. Pin code extraction from SKIM dump for older vehicles.
Standard Diagnostic Functions:
1. Connect to the devices using KWP2000 and UDS over ISO transport protocol (CAN)
2. For all electronic control units reading identification and extended identification information
3. For all electronic control units read errors (DTCs)
4. For all electronic control units clear errors (DTCs)
5. Output tests
6. Control unit adaptations – Seatbelt Warning Enable/Disable, Change mileage display between miles and kilometers and so on
7. Actual values display
8. Scan all units
9. Clear all DTCs

16. FVDI ABRITES Commander for Mitsubishi
ABRITES Commander for Mitsubishi is a software intended for standard diagnostics and key programming for Mitsubishi vehicles.

Standard Diagnostic Functions:
* For all electronic control units reading identification data
* For all electronic control units read/clear fault codes (DTCs)
* DTCs description is available in different languages
* Device scan
* Data Display / Measured values
* Coding/Adaptations
* Output tests
* Read/Program flash Engine Control Units
* Output tests
* Special functions: Key programming Dump tool
The key programming function currently works by CAN.

17. FVDI ABRITES Commander for DAF

FVDI ABRITES Commander for DAF Main Function:
1. Basic diagnose function.
2. Key learning by OBDII
3. Pin code not needed
4. Supported models from 2002-2008 year
FVDI ABRITES Commander Special fucntions:
Key learning :Key programming functionality

18. FVDI ABRITES Commander for Bike, Snowmobiles and Water scooters
FVDI ABRITES Diagnostics for Bike, Snowmobiles and Water scooters is a software intended for standard diagnostics and for some models – key programming.

19. FVDI Abrites for Hyundai, Kia + Tag Software + Immo Plus V13.6

FVDI Software Versions:
1. VAG – VW, Audi, Seat, Skoda: V21
2. Mercedes/Smart/Maybach: V64;
3. BMW: V10. 3;
4. Porsche: V4. 1;
5. OPEL/VAUXHALL: V6. 2;
6. Peugeot/Citroen: V6. 3;
7. Fiat/Alfa/Lancia: V5. 4 ;
8. Renault: V5. 4;
9. Toyota/Lexus: V6. 0;
10. Hyundai/KIA: V2. 1 ;
11. Nissan/Infiniti: V4. 3;
12. Ford: V4. 9
13. Chrysler: V3. 1;
14. VOLVO: V4. 3
15. Mitsubishi: V2. 1;
16. DAF: V1. 0;
17. Bike, Snowmobiles and Water scooters: V1. 2
18. TAG Key Tool: V6. 2;