Description
Main Features:
1.Configure the latest Car VII Bluetooth diagnostic connector
2.All system diagnosis: including Engine, Transmission, ABS, SRS, TPMS, EPB, Body System, Battery, ESP, IMMO etc.
3.Full OBD2 Functions: read car module information, read and clear fault code…..
4.OE-level advanced diagnosis: ECU offline/online coding, Bi-Directional Test(active test), Refresh Hidden …..
5.Supports works with endoscopes, battery detection, oscilloscopes, sensors, anti-theft programmer and other expansion modules to make the diagnostic function more powerful
6. Support CAN FD & DOIP Protocols+ FCA AutoAuth access
7.Supports 38+ Reset function: includes Oil reset, A/F Reset…….
8. Auto VIN: Support VIN code intelligent identification function, quickly enter the diagnosis
9.Enjoy 2 year Free update + Lifetime free to use
10.Other function: Share & Print Diagnostic Report,4-in-1 Live Data in Graphic ………
Supports Add-on modules:
– BST360 battery tester.
– Launch X431 i-TPMS
– X431 XPROG-3 GIII Key Matching
– VSP600 Videoscope
ECU Coding：
The advanced coding function is used to re-flash the vehicle control modules, which allows you to update the computer software on the vehicle to the latest version, as well as to reprogram adaptive data for certain components after making repairs or replacements, providing solutions for the issues of drivability, fuel efficiency, power loss, fault codes, durability of mechanical parts etc. But please note, ecu coding are NOT universal for all vehicles, please check compatibility with VIN number before purchase.
1.Online Coding: Compatible with VW/ Audi/ Skoda/ Ford/ Lincoin/ Mazda ONLY
2.Offline Coding: Compatible with Benz/ BMW/ Ford/ Mazda /Jaguar /Vauxhall /Opel, etc
3.Refresh the Hidden Features(Personalization)
4.Component Matching: Matching, relearning, calibration
5.Customize OE-Settings(Retrofitting/Modification)
38+ Reset functions
CAN FD & DOIP PROTOCOL：
Bi-directional control :
Bi-Directional Control capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators .For example , X431 PRO TT have the ability to actuate relays, injectors, coils, or perform system tests, etc. Also it will actuate solenoids valve and actuators for active testing to identify the error easily moreover. The bidirectional functions are quite extensive. even open an e.g.r. valve and seeing the difference in idle response and oxygen sensor voltage. Please note: Active tests are NOT universal for all vehicles, check compatibility with VIN number before purchase. Active tests vary depending on the manufacturer, year, and model, and only the available tests display in the menu.
Here are some other examples of active tests, which help you locate faults in the shortest time, saving time on troubleshooting:
Injector Buzz Test
Fuel Pump & Valve Tests
A/C Compressor clutch Activation
Turn the Wipers ON/OFF
Modulate Throttle ON/OFF
Acceleration Device Test
Supports more extensions module:
Auto VIN：
Through “smart diagnosis”, you can quickly read the vehicle VIN code, quickly enter the diagnosis, and check the historical diagnosis records
Full 10 Mode OBDII/EOBD/JOBD Car Diagnostics Functions:
1.Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5.Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8.On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems
9.Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Remote diagnosis:
Remote diagnosis can realize real-time communication between equipment and equipment or equipment and computers, complete remote diagnosis of vehicles, and make it a reality for repair technicians to diagnose vehicles thousands of miles away.
